Im new and need help

The Welcome Center is designed to provide you with information concerning your visit to our Club. Each first time visitor should stop by and tell us about yourself. The purpose of this introduction is to provide us with the necessary information to properly greet and welcome you to our forum.

Im new and need help

Postby roxiecole » Fri Oct 05, 2012 8:45 pm

I have a 1990 mark v11 bill blass and a few problems.. The drivers window doesnt go u or down the cig lighter doesnt work, the odometer says error door locks dont work and winshield washer fluid wont come out I love this car my late father gave it to me and I really want to get it fixed right I read alot of good info here and am so happy I found this site. Is there anyone who can help me. Thank you Roxie
User avatar
roxiecole
 

Re: Im new and need help

Postby tomnh » Fri Oct 05, 2012 9:15 pm

I moved you here to welcome, where you will most likely find help.
BTW Welcome to the family. You can post the electrical problems in the electrical section. There you will find all sorts of help :D
tomnh
Image

Dirty Deeds 90 lsc 93 Cobra heads and intake, 1.7 RR, 6AL ignition, United Exhaust 2 1/4" off road exhaust, no smog and no cats, X-Pipe, SCT chip and mass air, A9P ECU. 24lb injectors, 3:55 gears, 255 fuel pump, aeromotive fuel pressure regulator with gauge, 65mm TB, Ram Air intake, 17" 1998 cobra rims. Last tune was 290HP

Sandy 1989 lsc convertible (1 of 12) Original and Stock, driven daily and under renovation.

Buy Club Gear and Support Our Club !
http://www.cafepress.com/LincolnMarkVIIClub
User avatar
tomnh
DECEASED MEMBERS
 
Posts: 1888
Joined: Sat Dec 27, 2008 3:55 pm
Location: Rochester, New Hampshire

Re: Im new and need help

Postby artbaileyjr » Fri Oct 05, 2012 9:16 pm

Hi Roxie!
I'm glad that you want to keep your late fathers car on the road. They are wonderful cars.

For help, the best thing to do is address each item on it's own. You can do this by using the "search" feature at the upper right of your screen. This will lead you to anything that has been previously written about the subject.

If you dont get your answers there, try posting each problem, by itself, in the appropriate location. eg. "Cigarette lighter doesnt work". Post this in "Elecrtical" with a description of your problem and what you have done already. It also helps to know the year of your car and weather it's a Bill Blass, LSC or whatever.

Someone here has answers to all of your questions.

When you get a chance, stop by the "Welcome Wagon" and tell us a little about yourself and your car.
Art
..... It's more about the people, than it is about the cars .....

Image
... 1988 LSC 5 spd - Shifty ............... 1990 LSC SE - Trusty ............... 1991 LSC SE - Dusty ...
http://www.hemmings.com/mus/stories/200 ... uide1.html
http://www.lincolnlandonline.com/index.html
1984 Base Turbo diesel, Silver - 1986 Bill Blass, Med Sandlewood, - 1988 LSC, Shadow Blue - 1988 LSC, Black, 5 spd -1988 Bill Blass, White - 1990 SE, Black
1991 SE, Black - 1991 LSC, Currant Red - 1991 LSC, White - 1991 SE, Currant Red. All straight, licensed, garaged and completely dependable.
User avatar
artbaileyjr
DECEASED MEMBERS
 
Posts: 6043
Joined: Sat Dec 27, 2008 1:09 am
Location: Southeast Idaho or Southern Ca, depending on the season!

Re: Im new and need help

Postby artbaileyjr » Fri Oct 05, 2012 9:17 pm

Oops... Looks like Tom moved the post already.

Thanks Tom.

Art
..... It's more about the people, than it is about the cars .....

Image
... 1988 LSC 5 spd - Shifty ............... 1990 LSC SE - Trusty ............... 1991 LSC SE - Dusty ...
http://www.hemmings.com/mus/stories/200 ... uide1.html
http://www.lincolnlandonline.com/index.html
1984 Base Turbo diesel, Silver - 1986 Bill Blass, Med Sandlewood, - 1988 LSC, Shadow Blue - 1988 LSC, Black, 5 spd -1988 Bill Blass, White - 1990 SE, Black
1991 SE, Black - 1991 LSC, Currant Red - 1991 LSC, White - 1991 SE, Currant Red. All straight, licensed, garaged and completely dependable.
User avatar
artbaileyjr
DECEASED MEMBERS
 
Posts: 6043
Joined: Sat Dec 27, 2008 1:09 am
Location: Southeast Idaho or Southern Ca, depending on the season!

Re: Im new and need help

Postby White Lincoln » Sat Oct 06, 2012 1:02 am

Welcome!

For your window issue, you may want to try this great write up on how to fix that.

http://thelincolnmarkviiclub.org/docume ... Repair.pdf
User avatar
White Lincoln
SITE ADMIN
 
Posts: 3044
Joined: Fri Aug 21, 2009 6:27 pm

Re: Im new and need help

Postby LSCPRINCESS » Thu Oct 11, 2012 12:39 pm

welcome to the site, you will get lots of help here and make great friends that we all have in common are our Marks!
"The Princess"
http://www.nelsc.com
Image
1991 Lincoln Mark VII LSC SE - Custom Metallic Garnett Red
1990 Lincoln Mark VII LSC Saleen - Purple
1990 Lincoln Mark VII LSC- Metallic Silver & Red
2013 Ford Edge SEL - Red
2003 Dodge Ram 1500 - Black
1994 Ford Mustang GT - Calypso Green
User avatar
LSCPRINCESS
Chapter Coordinator, Massachusetts
 
Posts: 332
Joined: Fri Jan 02, 2009 5:42 pm
Location: FITCHBURG, MA

Re: Im new and need help

Postby tomc » Mon Dec 10, 2012 10:50 am

Welcome to the club.
If you find you need a part let me know.
I have a large inventory of Mark VII parts so just drop me a line and tell me what part you need.
My email is: curry1391@comcast.net

I live in Vancouver, Washington and can ship all over the world so let me know what you might need.
The window motor gear is probably gone, you can get just the gear at RockAuto.com.
The door locks are motor driven and more than likely they are not working and need replacing.
The washer fluid is more than likely real dirty and the lines have become plugged. Someone with a air compressor can blow the fluid back into the reservoir to clear the lines.
If by flushing the lines back into the reservoir does not work then you may need a new motor.
If you find you need to replace the motor or clean out the reservoir you will need to take the inner liner of the driver side fender off to get to it.
The motors can be found on the internet or you can get one from another Ford product.
If you need another reservoir I have one in stock.
Finally, look at our club site and see if anyone can address the ERROR on the instrument cluster. If no one can help or they say to replace the unit, let me know. I have a few of those in stock as well.\

Tom Curry
curry1391@comcast.net
User avatar
tomc
CLUB MEMBER
 
Posts: 76
Joined: Thu Jul 09, 2009 1:53 pm
Location: Vancouver, Washington


Return to The Welcome Center

Who is online

Users browsing this forum: No registered users and 1 guest